Hydraulics Online - Supplying you with Commercial Hydraulics and Commercial Hydraulics gear pumps, Commerical Hydraulics gear motors, Commerical Hydraulics piston pumps, Commerical Hydraulics flow dividers, Commerical Hydraulics valves and other Commercial Hydraulics equipment and components.
It's simple at Hydraulics Online... if it's hydraulic we can design it, supply it, solve it and repair it. Use the links to the left or click here to find out more about us, our customers and what they think of us.
Commercial Hydraulics are now part of the Parker Group, making them part of one of the largest families in the hydraulics industry. Before this takeover, Commercial had established itself as one of, if not the, biggest world names in the manufacture of hydraulic pumps, hydraulic gear motors, hydraulic piston pumps, hydraulic flow dividers and hydraulic valves. Now with the backing of Parker, Commercial Hydraulics continues to lead the field and their series of hydraulic gear pumps is often called the industry standard by which all other hydraulic gear pumps are measured.
Previously branded Commerical Hydraulics pumps, motors and flow dividers are still made to the same exacting standards by Parker; the only difference is that the previous Commercial Hydraulics product code is now preceded by "PG" (Parker Group).
PGP/PGM 030/050/075 SERIES CAST IRON PUMPS & MOTORS
Manufactured with hi-tensile grey iron, this series offer a wide variety of drive shafts that are designed for high-torque applications and unique pressure balanced thrust plates comtribute to optimized performance. Units are available in single and multiple section configurations, along with various valve and Relief Valve options.
.jpg) |
P30 / M30 / PGP030 / PGM030 / P31 / M31 / PGP031 / PGM031 Series:
- Single and multiple pump/motor, flow divider, piggyback and winch motor configurations are available
- Speeds up to 2400 rpm
- Pressures up to to 3000 psi (206 bar)
- Output flows up to to 41 gpm (155 lpm)
- Average PGM030 torque up to 1125 in-lbs (1296 kg-cm) @ 2000 psi (137 bar)
- Average PGM031 Ttrque up to 1370 in-lbs (1578 kg-cm) @ 2500 psi (172 bar)
- Optional priority or two-speed valves are available
|
 |
P50 / M50 / PGP050 / PGM050 / P51 / M51 / PGP051 / PGM051 Series:
- Single and multiple pump/motor, flow divider, piggyback and winch motor configurations are available
- Speeds up to 2400 rpm
- Pressures up to to 3000 psi (206 bar)
- Output flows up to to 66 gpm (250 lpm)
- Average PGM050 torque up to 1720 in-lbs (2016 kg-cm) @ 2000 psi (137 bar)
- Average PGM051 torque up to 2250 in-lbs (2592 kg-cm) @ 2500 psi (172 bar)
- Optional priority, two-speed, and unloader valves are available.
|
 |
P75 / PGP075 / PGM075 / P76 / PGP076 / PGM076 Series:
- Single and multiple pump/motor, flow divider, piggyback and winch motor configurations are available
- Speeds up to 2400 rpm
- Pressures up to to 3000 psi (206 bar)
- Output flows up to to 128 gpm (484 lpm)
- Average PGM075 torque up to 3425 in-lbs (3945 kg-cm) @ 2000 psi (137 bar)
- Average PGM076 torque up to 3425 in-lbs (3945 kg-cm) @ 2500 psi (172 bar)
- Optional two-speed valves are available
|
PGP/PGM 300 SERIES CAST IRON PUMPS AND MOTORS
The PGP/PGM 300 Series products set the standard for superior performance and reliability in heavy-duty hydraulic applications. The three-piece cast iron construction with large area, low-friction bushings provide strength, high efficiency, and long life in severe operating environments. The design includes an advanced thrust plate and seal configuration, which optimizes performance even in high temperature and low viscosity conditions.
.jpg) |
P315 / PGP315 / PGM 315 Series:
- Single and multiple pump/motor, piggyback and thru-drive configurations
- Speeds from 900-3000 rpm
- Fluid displacements up to 2.48 cir (40.6 ccr)
- Continuous pressures up to 3500 psi (241 bar)
- Intermittent pressures up to 4000 psi (275 bar)
- Output flows up to 31.5 gpm (119 lpm)
- Motor torque from 640-925 in-lbs (737-1065 kg-cm) @ 3000 rpm
- High strength one-piece integral shafts
|
 |
P330 / PGP330 / PGM330 Series:
- Single and Multiple pump/motor, piggyback and thru-drive configurations
- Speeds from 900-3000 rpm
- Fluid displacements up to 3.94 cir (64.6 ccr)
- Continuous pressures up to 3500 psi (241 bar)
- Intermittent pressures up to 4000 psi (275 bar)
- Output flows up to 50.1 gpm (190 lpm)
- Motor torque from 980-1685 in-lbs (1129-1941 kg-cm) @ 3000 rpm
- High strength one-piece integral shafts
|
 |
P350 / PGP350 / PGM 350 Series:
- Single and multiple pump/motor, piggyback and thru-drive configurations
- Speeds from 900-2400 rpm
- Fluid displacements up to 6.38 cir (104.5 ccr)
- Continuous pressures up to 3500 psi (241 bar)
- Intermittent pressures up to 4000 psi (275 bar)
- Output flows up to 64.8 gpm (245.2 lpm)
- Motor torque from 1265-2350 in-lbs (1457-2707 kg-cm) @ 2400 rpm
- High strength one-piece intergral shafts
|
 |
P365 / PGP365 / PGM365 Series:
- Single and multiple pump/motor, piggyback and thru-drive configurations
- Speeds from 900-2400 rpm
- Fluid displacements up to 9.0 cir (147.5 ccr)
- Continuous pressures up to 3500 psi (241 bar)
- Intermittent pressures up to 4000 psi (275 bar)
- Output flows up to 90.7 gpm (343.3 lpm)
- Motor torque from 1705-3740 in-lbs (1964-4308 kg-cm) @ 2400 rpm
- High strength one-piece intergral shafts
|
For further information or technical advice and quotations on Commercial Hydraulics and Parker equipment, please contact our experienced sales team on: 0845 644 3640, or via sales@hydraulicsonline.com or fill in our Stock Enquiry Form.
While you’re here why don’t you “like” us on Facebook or “follow” us on Twitter and keep in touch with our news, advice, discounts and promotions.
We are constantly updating our site with more information and product ranges. To enquire please fill out the form below or call 0845-644-3640
Facebook
Twitter
Linked In