Hydraulic Pressure Relief Valves
These hydraulic valves are used as pressure limiting devices to protect hydraulic systems. Available as: direct acting relief valves, differential area and pilot operated valves, electric venting relief valves, antishock valves, and direct acting proportional valves.

Hydraulic Pressure Reducing Valves
Hydraulic pressure reducing valves are pressure limiting devices that limit pressure in one portion of a hydraulic circuit while leaving system pressure unaffected. Available as direct acting relieving valves, direct acting proportional relieving  valves, pilot operated relieving valves,  valves, and pilot operated proportional relieving valves.

Hydraulic Sequence Valves
As the name implies, hydraulic sequence valves control a sequence of operations. Sequence valves usually use a pressure signal to shift a spool, thereby opening or closing a flow path at a pre‑set pressure. Available as sequence valves (direct acting and balanced), unloader valves, 2 pump “hi‑low” unloading valves, 2 way valves with external pilot, valves with external pilot and drain “Kick‑Down” sequence valves.

Hydraulic Check Valves
Hydraulic check valves allow free flow in one direction and block flow in the opposite direction. Available as ball and poppet check valves, shuttle valves, and double acting check valves.

Hydraulic Pilot Operated Check Valves
These hydraulic valves are used to prevent a load from dropping in case of hose or tube failure or from drifting caused by directional control valve spool leakage. Available as single and double acting valves, single acting HIGT back-pressure valves and single-acting shut-off valves.

Hydraulic Needle Valves
Hydraulic needle valves provide adjustable, non‑compensated flow control. They are available with standard or fine adjust, needle valves with reverse free-flow check and with a variety of knob adjusting options.

Hydraulic Flow Control Pressure Compensated Valves
Pressure compensated flow control valves are used to limit or regulate flow. Available as 2 way flow regulators pressure compensated, 3 way flow regulators pressure compensated, Flow dividers and combiners, 2 way valves with reverse free flow check, 2 way and 3 way proportional valves.

Hydraulic Counterbalance (Overcentre) Valves
Hydraulic counterbalance valves are used to control the motion of a load in the following ways: to prevent a load from dropping in case of hose or tube failure or from drifting caused, by directional control valve spool leakage, to provide smooth, modulated motion when the load is in a lowering or run‑away mode or when the directional control valve is suddenly closed. Available as single and double acting valves, closed centre valves and motion control and lock valves.

Hydraulic Directional Solenoid Valves
Hydraulic solenoid valves are electrically‑operated, on‑off poppet or spool‑type valves for load holding, blocking, or directional control applications. Available as 2 way pilot operated valves, 3 way 2 positions valves, 4 way 2 positions valves or 4 way 3 position valves.

Hydraulic Automatic Reversing Valves
These hydraulic valves are used to automatically switch the direction of oil flow through either mechanical or pressure increase.